|
|
|
|
|
|
|
|
|
 |
|
|
|
Many Sizes Available From
6"x18" Up To 60"x200"
Contact Us With Your Requirements
|
|
|
• 6"x18" Hand Feed
• Ball Ways On Table
|
|
• 12"x24" Hydraulic Table Feed
• Auto Downfeed Control (Opt.)
|
|
|
|
Features:
• Rugged Meehanite Casting
• Cartridge Spindle
• Stand Alone Hydraulic Tank
• Auto Lube System
• Turcite-B Ways (Except Ball Way Models)
• Easy to Operate and Maintain
Many Popular Options:
• Computerized Auto Downfeed Controller
• Electro / Permanent Magnetic Chucks
• Variable Holding Auto-Demag Chuck Control
• Coolant or Coolant/Dust Systems
• Magnetic Separator
• Automatic Paper Coolant System
• Over the Wheel Dressers
• Rapid Up & Down
• Variable Speed Spindle
• Many More Options Available
|
|
|
TG-4 Grinder
|
TG-4 Four Axes CNC Tool Grinder
Features...
• Pre-set program is not required. Individual software design no complicated program, no skillfull technician required and easy to operate.
• Simple input methods for setting the location of & working pieces required by the job, can be operated on crt monitor to ensure the safety of operation, cutting can be memorized to avoid operate error.
• Low overhead individual developed software control the equipment, no need to purchase the expensive optional accessory.
• Working pieces holding uses air pressure for automatic holding of cutter's loading and unloading, easy & fast.
|
|
|
|
| Specification/Model |
TG-4
|
TG-5
|
| X, Y, Z Travel (mm) |
400x230x250
|
400x230x250
|
| A, Axis Swivel Angle |
-
|
10-200
|
| C, Axis Swivel Angle |
360
|
360
|
| Spindle Taper |
ISO #40 (#50)
|
ISO #40 (#50)
|
| Spindle Speed / Motor |
60-6000 RPM / 7 HP
|
60-6000 RPM / 10 HP
|
| Workhead Indexing |
1/36000
|
1/36000
|
| Rapid |
0.0002"
|
0.0002"
|
|
|
|
MTV-6 Grinder
|
MTV-6 Universal Cutter & Tool Grinding Machine
Features...
• Versatile Design & Construction
• 5-Axis Adjustable Grinding Wheelhead
• Exact Divisions
• Frequency Transformer Workpiece Spindle Runs Without Clearance
• Robust Casting Base
• Built-In Control Electric For The Guide Device to Feed With Rotating Movement
• Can Operate With One Hand Continuous Adjustment to Feed With Rotating
|
Specification...
Grinding Wheelhead:
• A-Axis: 120mm, B-Axis: 360°
• C-Axis: +90° / -15, D-Axis:+/-45°
• E-Axis: 80mm
• Grinding Region Dia: 1-100mm
• Grinding Movement, Longitudinal: 155mm
• Fine Adjustment, Longitudinal: 70mm
• Position Range, Longitudinal: 650mm
• Grinding Movement, lateral: 35mm
• Adjustment, Lateral: 180mm
• Height Adjustment, Grinding Wheelhead: 120mm
• Radius Concave Max: 20mm
• Radius Convex Max: 50mm
• Workpiece Spindle Holder: ISO 40
• Dividing: 2T-38T
• Grinding Wheel Dia. Max: 100mm
• Grinding Wheel Hole: 20mm
• Grinding Motor: 1.5 kw
• Grinding Spindle - RPM: 2000-12000 RPM
• Standard Voltage: 400V, 50 Hz
|
|
|
|
|
|
|
M-40 Universal Cutter & Tool Grinder
The den wen M-40 cutter and tool grinder can perform a wide variety of work, in addition to almost limitless application as a tool sharpener, the M-40 can also be adapted to light cylindrical, surface and internal grinding operation. A wide selection of attachments permit you to extend the versatility of this unit to suit your specific needs.
|
CM-2 Monaset Cutter & Tool Grinder
Precisely grinds, sharpens and reconditions parts with complex shapes.
|
|
|
|
|
|
|
Universal OD/ID
• 8"x20"-30"
Cylindrical Grinder
• Power Workhead
• Work Rests
• Many Features
|
|
|
|
|
We have many sizes of OD/ID Grinders to choose from, both manual and CNC.
Contact us with your requirements!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
