Cleveland Bed Mills


K3VLC / K3FLC (Centroid M15 Control) • Motor: 3 HP • Spindle: R8 or #30 • Spindle Speed: 4200 RPM	B3VC/B3FC (Centroid M15 Control) • Motor: 3 HP • Spindle: R8 or #30 • Spindle Speed: 4000 RPM	B5FC (Centroid Control) • Motor: 5 HP • Spindle: NST #40 • Spindle Speed: 40 ~ 4000 RPM
NEW MODELS AVAILABLE Contact Us For More Information
NEW MODELS AVAILABLE Contact Us For More Information	B6FC-W (Centroid Control) • Motor: 6 HP • Spindle: NST #40 • Spindle Speed: 40 ~ 4000 RPM	B8FC (Centroid M400 Control) • Motor: 7-1/2 HP • Spindle: NST #40 • Spindle Speed: 40 ~ 4000 RPM

Please See CNC Control Page for Specifications


B3EC (Centroid M15 Control) • Motor: 5 HP • Spindle: CAT #40 6000 RPM • Travel (X, Y, Z): 31.5"x16"x18" • Hi/Lo Speed	B6EC (Centroid M400 Control) • Motor: 7-1/2 HP • Spindle: CAT #40 6000 RPM • Travel (X, Y, Z): 42"x22"x24" • Hi/Lo Speed	B8EC (Centroid M400 Control) • Motor: 7-1/2 HP • Spindle: CAT #40 6000 RPM • Travel (X, Y, Z): 42"x22"x24 • Hi/Lo Speed

CNC Knee & Bed Mill Features:

• Built In ISO 9001 Quality Certified Factory
• AC Frequency Drive Spindle Motor (Except Models: K3VLC and B3VC)
• Programmable Spindle Speeds Available On All FC and EC Models
• Hi/Low Gear on VC and FC Models
• Hi/Low Belt on EC Models
• 3 Axis (4th & 5th Opt.) DC Servo Drives (AC Drives Opt.)
• Rigid Meehanite Castings
• Wide 4 Box Way Design on Y Axis, Models: B6FC-W, B6EC, B8FC, and B8EC
• Box Way on Z Axis Models: B6FC-W, B6EC, B8FC, and B8EC
• Manual Movement on Head (FC Models)
• Rigid Head (EC Models)
• For X & Y Axis ManualMovement is Standard on Some Models
• Precision Ground Double Nut Ballscrews for Accuracy Movement
• Laser Compensation
• Class 7 Bearing for Spindle Runout Less Than 0.0002"
• Auto Lube (Standard on Most Models)
• Auto Coolant (Standard on Most Models)
• Halogen Worklight
• Our Machines Come Standard With Centroid and Fanuc Controls, Other Controls Available Like Mirl(Taiwan) and Mitsubishi; Call Us With Your Requirements
• Please See Control Specifications Below

Specification/Model	K3VLC	K3FLC	B3VC	B3FC	B3EC	B6FC-W	B6EC	B8FC	B8EC
Work Table	10"x50"					14"x52"	16"x52"	16"x58"
X, Y & Z Axis Travel	31-1/2"x15"x4"		31-1/2"x16"x18"			42"x22"x24"		50"x22"x24"
Spindle Motor	3 HP				5 HP	6 HP	7-1/2 HP		10 HP
Spindle Taper	R-8 or NST #30				NST #40		CAT or BT #40	NST #40	CAT or BT #40
Spindle Speed	70-4200				0-6000	40-4000	0-6000	40-4000	0-6000

Cleveland Bed Mills

NEW MODELS AVAILABLE

Contact Us For More Information

NEW MODELS
AVAILABLE

Contact Us
For More Information