USED SIP HYDR-8P JIG BORER
Stock Number: 3033
SIP HYDR-8P,
Condition: VERY GOOD
Click to view larger photo
Equipped With:
Working Surface 61 3/4"x 40 1/2"
Working Speeds (18) 40 to 2000 RPM on vert spindle
horiz spindle speeds (15) 40 - 1000 rpm
Quill Diameter 4.710
Spindle Quill Traverse 12"
Spindle Feed 8 Selections 0.001 to 0.0025 F.P.R.
Specifications:
Table
Length 61-1/2"
Width 40-1/2"
Number of T-slots 10
Hydraulic travel 52"
Additional hand travel for fine setting 4"
Nominal measuring travel 55"
Hydraulic coarse setting speed 9 or 11 feet/min (*)
Milling feeds, up to 12"/min
Saddle of the vertical spindle
Nominal transverse travel 40"
Coarse setting speed 5 or 6 feet/min (*)
Milling feeds, in/min 1-2-3-6 or
1-1/8 2-1/4 3 3-1/2
Vertical spindle head
Tool shanks SIP-50-Taper
Quill travel 12"
Number of spindle speeds 18
Lowest speed 40 rpm
Highest speed 2000 rpm
Lowest feed, per revolution of spindle 0.001"
Number of quill feeds 8
Spindle rapid traverse 3-1/2 or 4 ft/min (*)
Cross Rail
Speed of the vertical travel 14 or 17 in/min (*)
Free space between uprights 57"
Distance from table top to vertical spindle nose 38-1/4" max.
Horizontal spindle head
Tool shank with SIP-50-Taper
Quill travel 12"
Number of spindle speeds 15
Lowest speed 40 rpm
Highest speed 1000 rpm
Number of quill feeds 8
Lowest feed, per revolution of spindle 0.001"
Saddle of the horizontal spindle head
Distance from table top to spindle center max. 31-1/2"
Distance from table top to spindle center min. 3-1/4"
Vertical power traverse
Coarse setting speed 17 or 21 in/min (*)
3 milling speeds 8-1/2 - 4-1/4 - 2 or
10-1/2 - 5 - 2-1/2 in/min (*)
Coolant pump
Delivery, per minute 12 pints/min
Reservoir capacity 5-1/2 gal.
Weights
Counterweight of the vertical spindle 420 lbs
Counterweight of the horizontal spindle head 1800 lbs
Net weight of machine appx. 17 tons
Permissible load
Permissible load on the worktable 2 tons
SPECIFICATIONS AND INFORMATION WAS TAKEN FROM MULTIPLE SOURCES SOME BUT NOT ALL CONFIRMED CUSTOMER SHOULD VERIFY
RACK FULL OF TOOLING SEE PICTURES
Cleveland Machinery Sales, Inc.
5000 Brookpark Rd.
Cleveland, Ohio 44134
216-741-8900
216-741-8995
sales@clevelandmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
