USED SIP 8P JIG BORER

Stock Number: 2434

SIP HYDR-8P,

Condition: EXCELLENT

Accessories & Tooling: - Electrical Cabinet updated 5/99 by Swisstronic Precision, some of the electrics used include GE/Fanuc Series 90-30 PLC, ABB Circuit breaker, Spindle Master AC Drives and Sprecher & Schuh Relays(Swiss) - Heidenhaim 3 Axis Digital Readout System on Cross Travel of Rail Head, Vertical Travel on Rail, and Table - (1) Locating Dial Indicator (see pg. 12 in manual) - (1) Optical Alignment Device (see pg 110 & 111 in manual) - (1) Set Proving Bar w/accessories (see pg 116 & 117 in manual) - (1) Locating Microscope (see pg 114 & 115 in manual) - (1) Model P1-5 SIP Rotary and Tilt Table w/Index Plates 17 3/4 dia. - (1) DIP Model PD-GH Rotary Talbe 31 1/2 dia. - (28) pcs. End Mill Holders #4MT Draw Bolt Type - (5) pcs. SIP 50 Taper Master Holders for MT4 - (3) pcs. SIP 50 Taper to #2MT Draw Bolt Type - (2) pcs. SIP 50 Taper to #3MT Tang Type - (2) pcs. SIP 50 Taper to #4MT Tang Type - (5) pcs. Shell Mill Holders - (1) pc. Jacobs No. 20N Drill Chuck 3/8 to 1" w/#4MT - (1) Albrecht Keyless Drill Chuck 1 to 13mm Cap. w/SIP 50 Arbor - (17) pcs. SIP Adjustable Boring Tool Holders L4 Style w/#4MT Draw Bolt Type - (2) pcs. SIP 50 Taper Surfacing Head Holder, 1 pc. 5 1/2 dia.; 1 pc. 6" dia. Insert Tooling Type - (3) pcs. SIP 50 Boring Tool Holders Adjustable 1 3/4 to 2 1/4 and 3 3/8 to 6 1/4 - (1) pc. 4 3/4 dia. Boring & Facing Head w/SIP 50 Arbor - (2) pcs. 100mm dia. Boring w/25mm Bar Cap. w/Bar Set, Heads have feed, approx. 35 bars - (22) pcs. Drill Set w/No.2MT/No. 4MT Shanks - (5) pcs. Boring Bar Extension Holders - (2) Offset Boring Heads, one w/SIP 50, one w/Straight Arbor, many additonal cutting inserts, *Factory Manuals, Electric Prints on updated Electrics

USED SIP 8P JIG BORER, Click to view larger photo...

Click to view larger photo

Specification	Description

Equipped With:
Working Surface 61 3/4"x 40 1/2"

Working Speeds (18) 40 to 2000 RPM on vert spindle
horiz spindle speeds (15) 40 - 1000 rpm

Quill Diameter 4.710

Spindle Quill Traverse 12"

Spindle Feed 8 Selections 0.001 to 0.0025 F.P.R.

Specifications:

Table
Length 61-1/2"
Width 40-1/2"
Number of T-slots 10
Hydraulic travel 52"
Additional hand travel for fine setting 4"
Nominal measuring travel 55"
Hydraulic coarse setting speed 9 or 11 feet/min (*)
Milling feeds, up to 12"/min

Saddle of the vertical spindle
Nominal transverse travel 40"
Coarse setting speed 5 or 6 feet/min (*)
Milling feeds, in/min 1-2-3-6 or
1-1/8 2-1/4 3 3-1/2

Vertical spindle head
Tool shanks SIP-50-Taper
Quill travel 12"
Number of spindle speeds 18
Lowest speed 40 rpm
Highest speed 2000 rpm
Lowest feed, per revolution of spindle 0.001"
Number of quill feeds 8
Spindle rapid traverse 3-1/2 or 4 ft/min (*)

Cross Rail
Speed of the vertical travel 14 or 17 in/min (*)
Free space between uprights 57"
Distance from table top to vertical spindle nose 38-1/4" max.

Horizontal spindle head
Tool shank with SIP-50-Taper
Quill travel 12"
Number of spindle speeds 15
Lowest speed 40 rpm
Highest speed 1000 rpm
Number of quill feeds 8
Lowest feed, per revolution of spindle 0.001"

Saddle of the horizontal spindle head
Distance from table top to spindle center max. 31-1/2"
Distance from table top to spindle center min. 3-1/4"
Vertical power traverse
Coarse setting speed 17 or 21 in/min (*)
3 milling speeds 8-1/2 - 4-1/4 - 2 or
10-1/2 - 5 - 2-1/2 in/min (*)

Coolant pump
Delivery, per minute 12 pints/min
Reservoir capacity 5-1/2 gal.

Weights
Counterweight of the vertical spindle 420 lbs
Counterweight of the horizontal spindle head 1800 lbs
Net weight of machine appx. 17 tons

Permissible load
Permissible load on the worktable 2 tons

PURCHASED FROM LARGE MFG CO WHO KEEP IT IN A SEPARATE ROOM AND GAVE US THE FOLLOWING INFORMATION ON MAINTAINENCE
REBUILT 1978
DIGITAL READOUT ADDED1996
NEW COUNTER BALANCE 1991
****NEW ELECTRICAL CONTROLS 1999

INFORMATION WAS GIVEN WHEN MACHINE PURCHASED BUT NOT CONFIRMED, NOR GUARANTEED, THIS ALSO APPLIES TO SPECIFICATIONS

Cleveland Machinery Sales, Inc.
5000 Brookpark Rd.
Cleveland, Ohio 44134
216-741-8900
216-741-8995
sales@clevelandmachinery.com

Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com